Your browser does not support JavaScript or has it disabled. To enable full functionality of this site it is necessary to enable JavaScript.

Network capacity map

Terms and conditions

The demand availability map provides an indication of the network’s capability to connect large-scale developments to Major Substations. The main assumptions are:

  • The data is provided as an indication capability and capacity only
  • The existing minimum and maximum load and hence the constraints shown are based on existing demand commissioned on the network and do not include any outstanding and quoted demand.
  • Connections to the substations with classification limited available capacity may still be possible, however there might be a requirement for significant network reinforcement to overcome the impact on the network constraints.

Use of Information
By viewing or using any data from this area, you are confirming that you are aware that [Southern Electric Power Distribution plc (SEPD)] or [Scottish Hydro Electric Power Distribution plc (SHEPD)] is the owner of the data and that you will not (i) share with or sell the data to any third party, (ii) use the data for any purpose other than assessing the suitability of capability of the network to connect large scale developments, or (ii) in any other way make the data available to a person not employed by your business without the prior agreement of SEPD/SHEPD. You will indemnify SEPD or SHEPD against all costs, claims, damages, losses and expenses arising as a result of any failure by you to comply with these requirements.

Legal disclaimer: We have developed the demand availability map to assist you with connections applications to our networks. They give a general illustration of demand availability only and cannot be relied upon to assess the terms of connection for specific premises. We do not accept liability for any error within the data or misinterpretation by you.

Nothing in this disclaimer limits or excludes our liability for (a) death or personal injury caused by our negligence; (b) fraud or fraudulent misrepresentation; or (c) any other liability that cannot be limited or excluded by applicable law. Subject to the above, we shall not be liable to you in tort (including negligence) or otherwise, arising under or in connection with your use of the generation availability map for: (a) loss of profits; (b) loss of sales or business; (c) loss of agreements or contracts; (d) loss of anticipated savings; (e) loss of or damage to goodwill; or (f) any indirect or consequential loss.

Severance
If any of these provisions should be determined unlawful, invalid or otherwise unenforceable by reason of law then, to the extent and within the jurisdiction which that provision is found to be unlawful, invalid or unenforceable, then that provision shall be deleted and shall not affect the validity and enforceability of the remaining provisions which shall continue to be binding and in force.

Governing Law and Jurisdiction
These terms and conditions and any dispute arising herein shall be governed by and construed in accordance with the laws of either England or Wales or Scotland depending on the country from which access is made, and subject to the exclusive jurisdiction of the English or Scottish Courts, whichever is applicable.

By continuing to access this area or using the date therein, you accept the terms and conditions detailed above.

Last Updated 17/03/2017 (11)
Terms And Conditions Accepted
  • Heat Map

    User Guide

    Step 1:

    Zoom in and out of the map and move between map and satellite view to locate the area where your project will be located.

    Step 2:

    Click on the substation to find out related information.

    Step 3:

    “Show Substations” illuminates all down-stream substations.

    Step 4:

    “Details” provides more information on the individual substation.

    All information is provided both as a map and list. Move between the two displays using the “Map” and “Summary” tabs at the top map to see preferred variations.